Brocade Network OS Command Reference v4.1.0 - Manual (Page 170)

132 Network OS Command Reference
53-1003115-01
clear logging auditlog
2
clear logging auditlog
Clears the audit log system messages.
Synopsis clear logging auditlog [rbridge-id {rbridge-id | all}]
Operands rbridge-id Executes the command on the specified switches. Valid completions for
rbridge-id include:
rbridge-id Specifies the RBridge ID. This parameter is not valid in standalone mode.
all Specifies all switches in the fabric.
Defaults This command is executed on the local switch.
Command Modes Privileged EXEC mode
Description Use this command to clear the saved audit log messages.
Usage Guidelines This command is supported only on the local switch.
Examples To clear the audit log messages on the local switch:
switch# clear logging auditlog
See Also clear logging raslog, log-dampening-debug (BGP), show logging auditlog