Show vcs – Brocade Network OS Command Reference v4.1.0 User Manual

Page 1236

1198

Network OS Command Reference

53-1003115-01

show vcs

Displays the Brocade VCS Fabric configuration.

Synopsis

show vcs {detail | virtual-ip}

Operands

detail

Displays detailed information about each RBridge in the fabric.

virtual-ip

Displays the virtual IP address.

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to display the Brocade VCS Fabric parameters (VCS ID and the switch
RBridge ID) and Brocade VCS Fabric mode.

Usage Guidelines

The VCS ID and switch RBridge ID are displayed only in VCS-enabled mode.

The show vcs command returns the state as “disabled” if the switch is in standalone mode. The
show fabric all command cannot be issued in standalone mode.

Examples

Example 1

To display the VCS summary view for a switch that is in fabric cluster mode ("Local-Only"):

switch# show vcs

Config Mode : Local-Only

VCS ID : 1

Total Number of Nodes : 1

Rbridge-Id WWN

Management IP VCS Status Fabric Status HostName

10:00:00:05:33:51:63:42* 10.17.37.154 Online

Online sw0

To display the VCS configuration details:

switch# show vcs detail

Config Mode

: Local-Only

VCS ID

: 1

Total Number of Nodes

: 6

Node :1

Serial Number : BKN2501G00R

Condition

: Good

Status

: Connected to Cluster

VCS Id

: 1

Rbridge-Id

: 38

Co-ordinator

: NO

WWN

: 10:00:00:05:33:52:2A:82

Switch MAC

: 00:05:33:52:2A:82

FCF MAC

: 0B:20:B0:64:10:27

Switch Type

: BR-VDX6720-24-C-24

Internal IP

: 127.1.0.38

Management IP : 10.17.10.38

Node :2

Serial Number : BZA0330G00P