Brocade Network OS Command Reference v4.1.0 - Manual (Page 1032)

994 Network OS Command Reference
53-1003115-01
show running-config
2
show running-config
Displays the contents of the running configuration.
Synopsis show running-config
Operands Refer to the Usage Guidelines.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the running configuration. This is the configuration that is currently
active on the local switch but which is not saved persistently.
Usage Guidelines This command is supported only on the local switch.
Enter show running-config ? to display the list of available configuration entries.
Examples To display the running configuration:
switch# show running-config
chassis virtual-ip 10.24.73.50/20
no diag post enable
linecard 2 LC48x10G
linecard 4 LC48x10G
class-map default
match any
!
logging rbridge-id 1
raslog console INFO
!
logging auditlog class SECURITY
logging auditlog class CONFIGURATION
logging auditlog class FIRMWARE
logging syslog-facility local LOG_LOCAL7
switch-attributes 1
chassis-name VDX8770-4
host-name sw0
!
support rbridge-id 1
ffdc
!
snmp-server contact "Field Support."
snmp-server location "End User Premise."
snmp-server sys-descr "Brocade VDX Switch."
snmp-server community ConvergedNetwork
snmp-server community OrigEquipMfr rw
snmp-server community "Secret C0de" rw
snmp-server community common!
(output truncated)
See Also show startup-config, show startup-db