Brocade Network OS Command Reference v4.1.0 - Manual (Page 190)

152 Network OS Command Reference
53-1003115-01
compare-routerid (BGP)
2
compare-routerid (BGP)
Enables comparison of router IDs, so that the path-comparison algorithm compares the device IDs
of neighbors that sent otherwise equal-length paths.
Synopsis compare-routerid
no compare-routerid
Operands None
Defaults None
Command Modes BGP configuration mode
Description Use this command to enable the comparison of the router IDs of otherwise equal paths.
Usage Guidelines Use the no form of this command to restore the default.
Examples To configure the device always to compare router IDs:
switch(config)# rbridge-id 10
switch(config-rbridge-id-10)# router bgp
switch(config-bgp-router)# compare-routerid
See Also None