Brocade Network OS Command Reference v4.1.0 - Manual (Page 1316)

1278 Network OS Command Reference
53-1003115-01
switchport port-security oui
2
switchport port-security oui
Configures an Organizationally Unique Identifier (OUI) MAC address for port security on an
interface port.
Synopsis switchport port-security oui address
no switchport port-security oui
Operands address The OUI MAC address from which to accept vendor traffic, in the format
xxxx.xxxx.xxxx.
Defaults None
Command Modes Interface subtype configuration mode
Description Use this command to configure an OUI MAC address from which the interface will accept traffic. All
other addresses are ignored.
Usage Guidelines Use the no switchport port-security oui command to disable this option.
The use of static secure MAC addresses is not included in OUI-based port security.
NOTE
OUI-based port security is not supported on Brocade VDX 6710 and VDX 6720 platforms.
When you configure the first OUI MAC address on a secure port, traffic floods until the entries are
programmed in the hardware.
Examples None
See Also None