Brocade Network OS Command Reference v4.1.0 - Manual (Page 1103)

Network OS Command Reference 1065
53-1003115-01
show running-config interface tengigabitethernet lacp
2
show running-config interface tengigabitethernet lacp
Displays interface configuration parameters for the Link Aggregation Control Protocol (LACP) for a
10-gigabit Ethernet interface.
Synopsis show running-config interface tengigabitethernet [rbridge-id/slot/port] lacp [timeout]
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
timeout Indicates whether the interface timeout is short (for Brocade trunks) or long
(for standard trunks).
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display LACP settings for the specified 10-gigabit Ethernet interface.
Usage Guidelines None
Examples None
See Also lacp timeout