Show qos queue interface – Brocade Network OS Command Reference v4.1.0 User Manual
Page 1009
Network OS Command Reference
971
53-1003115-01
show qos queue interface
2
show qos queue interface
Displays the runtime state retrieved from the interface reflecting the number of packets and bytes
sent and received for each priority.
Synopsis
show qos queue interface [tengigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port | all]
Operands
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id
Specifies the RBridge ID.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id
Specifies the RBridge ID.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
all
Reports QoS statistics for all Ethernet interfaces within the system.
Defaults
None
Command Modes
Privileged EXEC mode
Description
Use this command to display the runtime state retrieved from the interface reflecting the number
of packets and bytes sent and received for each priority.
Usage Guidelines
For a standalone switch, all ASICs are considered as slot number zero (0).
The gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710,
Brocade VDX 8770-4, and Brocade VDX 8770-8 switches.
Examples
To display the queueing information for a 10-gigabit Ethernet interface:
switch# show qos queue interface tengigabitethernet 5/0/2
Interface Ten Gigabit Ethernet 5/0/2
RX
RX
TX
TX
CoS
Packets
Bytes
TC
Packets
Bytes
-------------------------------
-------------------------------
0
680458
87098624
0
0
0
1
0
0
1
32318
0
2
0
0
2
0
0
3
0
0
3
0
0
4
0
0
4
0
0
5
0
0
5
0
0
6
0
0
6
0
0
7
0
0
7
0
0
See Also