Brocade Network OS Command Reference v4.1.0 - Manual (Page 713)

Network OS Command Reference 675
53-1003115-01
sflow enable (global version)
2
sflow enable (global version)
Enables sFlow globally.
Synopsis sflow enable
no sflow enable
Operands None
Defaults sFlow is disabled on the system.
Command Modes Global configuration mode
Description Use this command to enable sFlow globally.
Usage Guidelines This command is supported on physical ports only.
On a Brocade VDX 8770, SPAN and sFlow can be enabled at the same time.
On a Brocade VDX 6720, SPAN and sFlow cannot be enabled at the same time.
Enter no sflow enable to disable sFlow globally.
Examples To enable sFlow globally:
switch(config)# sflow enable
See Also sflow enable (interface version)