Brocade Network OS Command Reference v4.1.0 - Manual (Page 472)

434 Network OS Command Reference
53-1003115-01
logical-chassis principal-switchover
2
logical-chassis principal-switchover
Triggers a fabric reformation and elects a principal node based on the principal priority value.
Synopsis logical-chassis principal-switchover
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Issue this command after you have used the logical-chassis principal-priority priority-value
command so that the priority you set takes effect and a new principal node is selected on the
cluster.
Usage Guidelines None
Examples
switch# configure
switch(config)# rbridge-id 5
switch(config-rbridge-id-5)# logical-chassis principal-priority 1
switch(config-rbridge-id-5)# end
switch# logical-chassis principal-switchover
See Also logical-chassis principal-priority