Zoning enabled-configuration cfg-action cfg-clear – Brocade Network OS Command Reference v4.1.0 User Manual

Page 1413

Network OS Command Reference

1375

53-1003115-01

zoning enabled-configuration cfg-action cfg-clear

Clears all zone configurations in the defined configuration.

Synopsis

zoning enabled-configuration cfg-action cfg-clear

Operands

None

Defaults

None

Command Modes

Global configuration mode

Description

Use this command to clear all defined zone information. The enabled configuration is not affected.

Usage Guidelines

This command is supported only in Brocade VCS Fabric mode. Zoning configuration data are
automatically distributed among all RBridges in the VCS Fabric. Standalone mode is not
supported.

This command can be entered on any RBridge in a Brocade VCS Fabric, but it is always executed
on the principal RBridge in fabric cluster mode. In logical chassis cluster mode, edits can be
performed only from the principal RBridge.

After clearing the defined zone configuration with zoning enabled-configuration cfg-action
cfg-clear, enter no zoning enabled-configuration cfg-name to clear the entire zoning configuration
(both the defined zone configuration and the enabled configuration).

If no current active zoning configuration exists, or you just want to clear the defined zone
configuration, enter zoning enabled-configuration cfg-action cfg-save to commit the transaction.

If a cfg-clear is entered accidentally, issue a cfg-transaction-abort command.

CAUTION

All defined zone objects in the defined zone configuration are deleted. If you try to commit the
empty defined zone configuration while a zone configuration is enabled, you are warned to first
disable the enabled zone configuration or to provide a valid configuration with the same name.

Examples

To clear the defined zoning database:

switch(config)# zoning enabled-configuration cfg-action cfg-clear