Brocade Network OS Command Reference v4.1.0 - Manual (Page 1263)

Network OS Command Reference 1225
53-1003115-01
snmp-server context
2
snmp-server context
Maps the context name in an SNMPv3 packet’s protocol data unit (PDU) to the name of a VPN
routing and forwarding (VRF) instance.
Synopsis snmp-server context context_name vrf-name vrf_name
no snmp-server-context context_name vrf-name vrf_name
Operands context Enables the specification of a variable context_name that can be passed in
the SNMP PDU.
vrf-name Enables the specification of a variable vrf_name that can be retrieved
when an SNMP request is sent with the configured context_name. This
variable can be used in SNMP requests for “ipCidrRouteTable.”
Defaults None
Command Modes Global configuration mode
Description Use this command to create a context and map it to the given VRF. The context-to-VRF mapping is
one-to-one and is applicable to all SNMP versions.
Usage Guidelines None
Examples The following snmp-server context command maps the context name “mycontext” to the VRF
name “myvrf.”
switch(config)# snmp-server context mycontext vrf-name myvrf
The following snmp-server context command deletes the VRF name “myvrf.”
switch(config)# no snmp-server context mycontext vrf-name myvrf
The following snmp-server context command creates the new VRF name “mynewvrf”and maps the
context to it.
switch(config)# snmp-server context mycontext vrf-name mynewvrf
See Also show running-config snmp-server, snmp-server community, snmp-server contact,
snmp-server location, snmp-server user, snmp-server v3host