Brocade Network OS Command Reference v4.1.0 - Manual (Page 1082)

1044 Network OS Command Reference
53-1003115-01
show running-config interface gigabitethernet mtu
2
show running-config interface gigabitethernet mtu
Displays the configured MTU for a 1-gigabit Ethernet interface.
Synopsis show running-config interface gigabitethernet [rbridge-id/slot/port] mtu
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the configured MTU for the specified interface.
Usage Guidelines This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and
Brocade VDX 8770-8 switches.
Examples
switch# show running-config interface gigabitethernet 1/0/8 mtu
interface Gigabit Ethernet 1/0/8
mtu 2500
!
See Also ip mtu