Brocade Network OS Command Reference v4.1.0 - Manual (Page 498)

460 Network OS Command Reference
53-1003115-01
match ip address
2
match ip address
Matches IP address conditions in a route-map instance.
Synopsis match ip address prefix-list name
no match ip address prefix-list name
Operands name Name of the prefix list. Range is from 1 through 32 ASCII characters.
Defaults None
Command Modes Route-map configuration mode
Description Use this command to specify an IP prefix match clause in a route-map instance.
Usage Guidelines None
Examples None
See Also ip prefix-list, match interface, match ip next-hop, match metric, match route-type, match tag,
route-map, set distance, set ip next-hop, set metric, set tag