Brocade Network OS Command Reference v4.1.0 - Manual (Page 702)

664 Network OS Command Reference
53-1003115-01
set ip interface null0
2
set ip interface null0
Drops traffic when the null 0 statement becomes the active setting.
Synopsis set ip interface null0
no set ip interface null0
Operands None
Defaults None
Command Modes Route-map configuration mode
Description Use this command to drop traffic when the null 0 statement becomes the active setting as
determined by the route-hop selection process.
Usage Guidelines The no command setting deletes the matching filter from the ACL.
Examples None
See Also ip prefix-list, match interface, match ip address, match ip next-hop, match metric,
match route-type, match tag, route-map, set distance, set metric, set tag