Brocade Network OS Command Reference v4.1.0 - Manual (Page 698)

660 Network OS Command Reference
53-1003115-01
set cos traffic-class
2
set cos traffic-class
Specifies the User-Priority field value in VLAN header and traffic-class queuing value when a
packet matches a flow.
Synopsis set cos {0..7} traffic-class {0..7}
no set cos {0..7} traffic-class {0..7}
Operands 0..7} Modifies the Class of Service (CoS) value in the VLAN header of classified
traffic, or assigns a queue to the classified traffic. The range of valid values
is from 0 through 7.
Defaults None
Command Modes Route-map configuration mode
Description Use this command to specify the User-Priority field value in VLAN header and traffic-class value
when a packet matches a flow.
Usage Guidelines None
Examples
switch(config)# policy-map p1
switch(config-policymap)# class c1
switch(config-policyclass)# set cos 4 traffic-class 3
See Also class, policy-map