Brocade Network OS Command Reference v4.1.0 - Manual (Page 403)

Network OS Command Reference 365
53-1003115-01
ip igmp snooping querier enable
2
ip igmp snooping querier enable
Activates or deactivates the Internet Group Management Protocol (IGMP) snooping querier.
Synopsis ip igmp snooping querier enable
no ip igmp snooping querier enable
Operands None
Defaults IGMP snooping querier is disabled.
Command Modes VLAN interface configuration mode
Description Use this command to control the IGMP snooping querier functionality.
Usage Guidelines Enter no ip igmp snooping querier enable to disable the IGMP snooping querier.
This command is mutually exclusive of ip igmp snooping mrouter interface.
Examples To enable the IGMP snooping querier feature for the VLAN interface:
switch(config)# interface vlan 100
switch(config-Vlan-100)# ip igmp snooping querier enable
See Also interface, ip igmp snooping enable (global version), show ip igmp snooping,
ip igmp snooping enable, ip igmp snooping fast-leave, ip igmp snooping mrouter,
ip igmp snooping mrouter-timeout