Brocade Network OS Command Reference v4.1.0 - Manual (Page 832)

794 Network OS Command Reference
53-1003115-01
show fcoe login
2
show fcoe login
Displays FCoE login information.
Synopsis show fcoe login {interface [WORD | VN-Num | rbridge | port]} {rbridge-id rbridge-id} {vfid vf_id}
{vlan vlan_id}
Operands interface Displays logins for an FCoE interface
WORD Displays Word information.
VN-Num Displays VN-Num information.
rbridge Displays RBridge information.
port Displays port information.
rbridge-id rbridge-id Displays FCoE logins for a given RBridge ID.
vfid vf_id Displays logins for an FCoE virtual fabric. Valid values range from 1
through 4096.
vlan vlan_id Displays logins for an FCoE VLAN. Refer to the Usage Guidelines.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display FCoE login information.
Usage Guidelines This command is not available in standalone mode.
NOTE
The FCoE virtual fabric is not to be confused with the Virtual Fabrics feature that supports service
or transport VFs.
On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point
of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs
are as follows:
On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087 through 4095
are reserved on these switches), and 4096 through 8191 for service or transport VFs in a Virtual
Fabrics context.
On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches), and 4096 through 8191 for service or transport
VFs in a Virtual Fabrics context.
Examples None
See Also None