Brocade Network OS Command Reference v4.1.0 - Manual (Page 1126)

1088 Network OS Command Reference
53-1003115-01
show running-config logging auditlog class
2
show running-config logging auditlog class
Displays the severity level configured for the audit log class.
Synopsis show running-config logging auditlog class
Operands None
Defaults Displays the information for the local switch.
Command Modes Privileged EXEC mode
Description Use this command to display the enabled audit log class.
Usage Guidelines This command is supported only on the local switch.
This command is not supported on the standby management module.
Examples To display audit log classes enabled on the switch:
switch# show running-config logging auditlog class
logging auditlog class SECURITY
logging auditlog class CONFIGURATION
logging auditlog class FIRMWARE
See Also clear logging raslog, clear logging auditlog