Brocade Network OS Command Reference v4.1.0 - Manual (Page 931)

Network OS Command Reference 893
53-1003115-01
show ip pim rpf
2
show ip pim rpf
Displays the Reverse Path Forwarding (RPF) for a given unicast IP address.
Synopsis show ip pim rpf A.B.C.D
Operands A.B.C.D The unicast IP address.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the port that PIM regards as the best reverse path for a given unicast
IP address.
Usage Guidelines The unicast IP address may be an RP address or source address.
Examples A typical output for this command.
switch# show ip pim rpf 123.32.120.10
Source 123.32.120.10 directly connected on Te 1/0/21
See Also router pim, show ip pim bsr, show ip pim group, show ip pim neighbor, show ip pim rp-hash,
show ip pim rp-map, show ip pim rp-set, show ip pim-sparse, show ip pim traffic,
show ip pim traffic, show ip pim traffic