Brocade Network OS Command Reference v4.1.0 - Manual (Page 1313)

Network OS Command Reference 1275
53-1003115-01
switchport port-security
2
switchport port-security
Enables or disables port security on an interface port.
Synopsis switchport port-security
no switchport port-security
Operands None
Defaults None
Command Modes Interface subtype configuration mode
Description Use this command to enable or disable port security on an interface port.
Usage Guidelines Use the no switchport port-security command to disable port security on the interface.
Port mode change is not allowed when port security is enabled on the interface.
Examples None
See Also None