Brocade Network OS Command Reference v4.1.0 User Manual

Page 1089

Network OS Command Reference

1051

53-1003115-01

show running-config interface gigabitethernet switchport

Displays the configured switching characteristics for the 1-gigabit Ethernet Layer 2 interface.

Synopsis

show running-config interface gigabitethernet [rbridge-id/slot/port] switchport [access [vlan] |
mode | trunk [allowed [vlan] |native-vlan | tag [native-vlan]]

Operands

rbridge-id

Specifies a switch by its RBridge ID.

slot

Specifies a valid slot number.

port

Specifies a valid port number.

access

Displays whether the Layer 2 interface is configured as access.

access vlan

Displays whether the specific VLAN on the Layer 2 interface is configured
as access.

mode

Displays whether the Layer 2 interface is configured for access, trunk or
converged.

trunk

Displays whether the Layer 2 interface is configured for trunk.

trunk allowed

Displays the configuration settings that determine the VLANs that will
transmit and receive through the Layer 2 interface.

trunk allowed vlan

Displays the configuration settings for a specific VLAN.

trunk allowed native-vlan

Displays the configured native VLAN characteristics of the Layer 2 trunk
interface for classifying untagged traffic.

trunk tag

Displays whether tagging is enabled.

tag native-vlan

Displays tags for the native VLAN.

Defaults

Displays all configured Layer 2 switching characteristics for the port.

Command Modes

Privileged EXEC mode

Description

Use this command to display configured switching characteristics for the port.

Usage Guidelines

This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and
Brocade VDX 8770-8 switches.

Examples

switch# show running-config interface gigabitethernet 1/0/8 switchport

interface Gigabit Ethernet 1/0/8

switchport

switchport mode access

switchport access vlan 1