Apple Final Cut Pro 7 User Manual
Page 309
This will usually be one of the serial RS-422 or RS-232 device control protocols. See the
documentation that came with your audio device for information on which one to use.
Choose the appropriate
device control preset.
Make sure you choose
the appropriate audio
capture preset.
3
Choose an audio-only capture preset from the Capture/Input pop-up menu.
For more information about creating an audio-only capture preset, see
4
If you’re capturing audio from a device-controllable audio deck that’s genlocked to a
video capture interface connected to your computer, you need to select “Sync audio
capture to video source if present” in the General tab of the User Preferences window.
For more information, see
“Choosing Settings and Preferences.”
5
To locate material on an audio tape to capture, use the controls in the Log and Capture
window. Log clips the same way you would with any device-controllable video deck.
6
To capture material from an audio tape, capture clips the same way you would with any
device-controllable video deck.
For more information, see
7
To stop recording, or to interrupt batch capturing using device control, press Esc.
The audio clips you captured are placed in the logging bin in the Browser.
Capturing from an Audio Device Without Device Control
If your audio device does not support device control, you can manually press Play on the
audio device and click the Capture Now button in the Log and Capture window. However,
without device control, Final Cut Pro cannot receive timecode. If you capture a media file
without timecode, you will not be able to accurately recapture your footage again later.
309
Chapter 19
Capturing Audio from Tape