Apple Final Cut Pro 7 - Manual (Page 1685)

• Fast Forward: Moves the videotape forward. You can also press the L key repeatedly
to go through a range of speeds.
Mastering Settings Tab
You can add leader and trailer elements during both the Edit to Tape and Print to Video
operations.
To add leader or trailer elements when editing to tape
µ
Choose Mastering mode and specify settings in the Mastering Settings tab of the Edit to
Tape window.
To add leader or trailer elements when using the Print to Video command
µ
Select leader and trailer elements directly in the Print to Video dialog.
For more information about using leader and trailer elements, see “Adding Standard
Leader and Trailer Elements.”
All selected elements are output to tape in the order listed. Make sure to deselect elements
you don’t need. All element durations are specified in whole seconds.
Note: Some of these items may require rendering before you can start recording.
Select trailer elements to
be added at the end of
the clip or sequence.
Choose how much of
your sequence or clip
you want to output, and
select looping options.
Select all of the elements
you want to add before
the clip or sequence.
1685 Chapter 101 Assemble and Insert Editing Using Edit to Tape