Lenze 8400 TopLine - Manual (Page 974)

17 Parameter reference
17.2 Parameter list | C00428
974
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00428
C00430
Parameter | Name:
C00428 | SSI encoder: Coding
Data type: UNSIGNED_8
Index: 24147
d
= 5E53
h
 Encoder/feedback system: SSI encoder
Selection list (Lenze setting printed in bold) Info
0 Binary code
1 Gray code
2 Position Gray
From version 14.00.00 , SSI encoders are supported which
transmit the position data with Gray coding and the
status bits in binary format.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00430 | LS_MultiEncoder: Max. initialization time
Data type: UNSIGNED_16
Index: 24145
d
= 5E51
h
From version 12.00.00
 Encoder/feedback system: sin/cos absolute value encoder with HIPERFACE® protocol
Setting range (min. value | unit | max. value)
500 ms 20000
Subcodes Lenze setting Info
C00430/1 1500 ms Maximum time required by the encoder to respond to
the read request of the controller.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1