Lenze 8400 TopLine - Manual (Page 676)

10 Diagnostics & error management
10.3 Drive diagnostics with the »Engineer«
676
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10.3 Drive diagnostics with the »Engineer«
When an online connection to the controller has been established, the connected controller can be
diagnosed and relevant actual controller states can be displayed in a clearly arranged visualisation
using the »Engineer«.
Example: Representation of the diagnostic information in the »Engineer« V2.19
Button Function
Acknowledge error message (if the error cause has been eliminated).
Display the Logbook of the controller. ( 682)
 Display the internal state machine including the current device status.
 Display details of the status determining error.
 Display details of the current error.
 Display all active sources of a controller inhibit.
 Display all active sources of a quick stop.
Monitoring... Configure the Monitoring . ( 689)
Drive control... Display the bit assignment of the following control-related words:
• MCI control word ( C00136/1 )
• CAN control word ( C00136/2 )
• Cause of controller inhibit ( C00158 )
• Cause of quick stop ( C00159 )
• Status word ( C00150 )
• Status word 2 ( C00155 )
Device information... Display identification data, e.g. firmware information or serial number of individual
controller components.