Lenze 8400 TopLine - Manual (Page 1193)

Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
1193
17 Parameter reference
17.2 Parameter list | C01244
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C01244
C01245
Parameter | Name:
C01244 | MCK: Target detection - times
Data type: UNSIGNED_16
Index: 23331
d
= 5B23
h
Timing for various MCK functions
Setting range
(min. value | unit | max. value)
0 ms 60000
Subcodes Lenze setting Info
C01244/1 100 ms MCK: Dwell time - target position
• Time expiring after reaching the setpoint position for
positioning processes and enabling the actual
position detection in the target position window.
 Target position monitoring
C01244/2 0 ms MCK: Waiting time following error 1
• From version 02.00.00
 Following error monitoring system
C01244/3 0 ms MCK: Waiting time following error 2
• From version 02.00.00
 Following error monitoring system
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01245 | MCK: Target detection - positions
Data type: INTEGER_32
Index: 23330
d
= 5B22
h
Position settings for various MCK functions
Setting range
(min. value | unit | max. value)
0.0000 units 214748.3647
Subcodes Lenze setting Info
C01245/1 1.0000 units MCK: Window target position
• Window around the target position for comparison
with the actual position to see whether the drive is in
target.
 Target position monitoring
C01245/2 1.0000 units MCK: Blocking zone Modulo

Activation of the Modulo measuring system
C01245/3 0.0000 units MCKI: Hysteresis position change
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10000