Lenze 8400 TopLine - Manual (Page 1231)

Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
1231
17 Parameter reference
17.2 Parameter list | C01770
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C01770
C01771
C01772
C01773
C01774
C01775
Parameter | Name:
C01770 | Filter time - earth-fault detect. is running
Data type: UNSIGNED_8
Index: 22805
d
= 5915
h
Setting range (min. value | unit | max. value) Lenze setting
0 ms 250 2 ms
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01771 | BU-Osc: Cycle time selection
Data type: UNSIGNED_8
Index: 22804
d
= 5914
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01772 | BU-Osc: Trigger channel selection
Data type: UNSIGNED_8
Index: 22803
d
= 5913
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01773 | BU-Osc: Trigger command
Data type: UNSIGNED_8
Index: 22802
d
= 5912
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01774 | BU-Osc: Trigger mode
Data type: UNSIGNED_8
Index: 22801
d
= 5911
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01775 | BU-Osc: Trigger
Data type: INTEGER_16
Index: 22800
d
= 5910
h
This code is for device-internal use only and must not be written to by the user!