Lenze 8400 TopLine - Manual (Page 679)

Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
679
10 Diagnostics & error management
10.4 Drive diagnostics via keypad/bus system
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10.4 Drive diagnostics via keypad/bus system
Keypad display of the controller status
• If the keypad on the front of the controller is connected to the
diagnostic interface X6, the status of the controller is shown
via different icons on the LCD display in the area .
Icon Meaning Note
 Controller is switched on.  SwitchedOn ( 119)
 Controller is enabled.
 Quick stop active
 Controller is inhibited. The power outputs are inhibited.
 Speed controller 1 at the limit. The drive is torque-controlled.
 Set current limit has been exceeded in motor
or generator mode.
 Pulse inhibit active The power outputs are inhibited.
 System fault active
 Fault  Fault ( 123)
 Trouble  Trouble ( 122)
 TroubleQSP  TroubleQSP ( 121)
 Warning is active