Lenze 8400 TopLine - Manual (Page 970)

17 Parameter reference
17.2 Parameter list | C00417
970
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00417
C00420
C00421
Parameter | Name:
C00417 | Deactivate resolver error comp.
Data type: UNSIGNED_8
Index: 24158
d
= 5E5E
h
 Encoder/feedback system: Resolver
Selection list (Lenze setting printed in bold)
0 Resolver error comp. act.
1 Resolver error comp. deact.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00420 | Number of encoder increments
Data type: UNSIGNED_16
Index: 24155
d
= 5E5B
h
Indication of the encoder constant
 Encoder/feedback system: Multi-Encoder
Setting range (min. value | unit | max. value)
1 Incr./rev. 32767
Subcodes Lenze setting Info
C00420/1 128 incr./rev. FreqIn12: Encoder increment
C00420/2 128 incr./rev. FreqIn67: Encoder increment
C00420/3 512 incr./rev. LS_MultiEncoder : Encoder increment
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00421 | LS_MultiEncoder: Supply voltage
Data type: UNSIGNED_16
Index: 24154
d
= 5E5A
h
 Stop!
Before connecting an encoder, make sure that the encoder supply voltage is set correctly!
If the set supply voltage exceeds the permissible supply voltage of the connected encoder, the encoder may be
destroyed!
 Encoder/feedback system: Multi-Encoder
Setting range (min. value | unit | max. value) Lenze setting
5.0 V 12.0 5.0 V
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10