Lenze I/O system 1000 User Manual
Plc designer, Ä.hwtä
Table of contents
Document Outline
- I/O system 1000 - Modular I/O system
- Contents
- 1 About this documentation
- 2 System and product description
- 3 Establish communication
- 4 Mapping the real station structure in the »PLC Designer«
- 4.1 Creating a new project in the »PLC Designer«
- 4.2 Configuring the I/O modules at the backplane bus of the L-force Controller
- 4.3 Configuring I/O modules on the EtherCAT bus coupler module
- 4.4 Configuring I/O modules on the CANopen bus coupler module
- 4.5 Setting the cycle time for access to the I/O modules
- 5 Parameterising I/O modules in the »PLC Designer«
- 6 Error messages (backplane bus)
- Index
- Your opinion is important to us