Lenze 8400 TopLine - Manual (Page 1433)

Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
1433
19 Function library
19.1 Function blocks
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Parameter
bNegOverrange
BOOL
Monitoring of lower home position
TRUE Lower home position ( C01463/2 ) reached.
nVAdditive_a
INT
Material speed caused by the dancer motion
• Scaling: 16384 ≡ Maximum material speed (wVMax)
nVOut_a
INT
Current circumferential speed of the reel when the dancer hub is entered
• Scaling: 16384 ≡ Maximum material speed (wVMax)
nMAdditive_a
INT
Additional torque for damping the dancer position control
• Scaling: 16384 ≡ 100 %
Parameter Possible settings Info
C01460/1 0 ms 1000 TConst
• Time constant for filtering the
actual position value.
• Lenze setting: 10 ms
C01461/1 % Upper limit position
• Lenze setting: 100.00 %
C01461/2 % Lower limit position
• Lenze setting: -100.00 %
C01462/1 mm dwLength
• Storage volumen of the dancer
(dancer hub).
• Lenze setting:
C01463/1 % Upper home position
• Lenze setting: 90.00 %
C01463/2 % Lower home position
• Lenze setting: -90.00 %
C01464/1 % nWindowSetPos
• Tolerance zone for monitoring the
dancer position.
• Lenze setting: 10.00 %
C01465/1 s wDelayTime
• Delay time for monitoring the
dancer position.
• Lenze setting: 0.100 s
C01466/1 ms wTConstVAdd
• Time constant for filtering the
additional speed.
• Lenze setting: 10 ms
C01467/1 % nDeadBand
• Dead band area for feedforward
control torque (nMAdditive_a).
• Lenze setting: 1.00 %
C01468/1 wDamping
• Damping factor for feedforward
control torque (nMAdditive_a).
• Lenze setting: 0.00
Identifier
Data type
Value/meaning