13 action type "counting, 13 action type "counting" 3, L_sequencer_1: "counting" action – Lenze 8400 TopLine User Manual
Page 1663: Counting, 19 function library, 9 x x x
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
1663
19
Function library
19.1
Function blocks
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
19.1.158.13 Action type "Counting"
For counting processes, 8 actions of "counting" type are available.
• Every processing of the action causes an increase or decrease of the counter content of the
corresponding counter by the set step value (counting up or down).
• If the comparison condition for comparing the counter content to an adjustable comparison
value is fulfilled, it can be branched to any step.
• For setting a counter to a starting value, 5 actions of "
" type are available.
• The current counter content of the counters 1 ... 5 is displayed in
.
Action call (entry in the sequence table)
with action number xxx = 001 ... 008
Parameter
The available actions 1 ... 8 are represented via the subcodes 1 ... 8.
Parameter
Possible settings
Info
-2147483647
2147483647 Counter n: Current counter content
• Read only
Counting act. n: Counter no.
0 Counting deactivated
(Sequence step is processed.)
1 Counter 1
... ...
5 Counter 5
-2147483647
2147483647 Counting act. n: Step value
• Value by which the counter is
increased or decreased.
• Initialisation: 1
-2147483647
2147483647 Counting act. n: Comparison value
• Value to which the counter is
compared.
Counting act. n: Jump destination
• If the set comparison condition is
fulfilled, it is branched to the step
set here.
• If the condition is not fulfilled or
"0" setting, the step followed in
the sequence table is processed.
0 Sequence step
1...100 Step 1 ... 100
Counting act. n: Comparison
operation
1 Counter content = comparison value
2 Counter content > comparison value
3 Counter content ≥ comparison value
4 Counter content < comparison value
5 Counter content ≤ comparison value
1
3
4
2
9 x x x