Lenze 8400 TopLine - Manual (Page 1230)

17 Parameter reference
17.2 Parameter list | C01672
1230
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C01672
C01751
C01752
C01755
C01763
C01764
C01765
Parameter | Name:
C01672 | L_ComparePhi 1-5: Window
Data type: INTEGER_32
Index: 22903
d
= 5977
h
Window for the comparison operation
Setting range
(min. value | unit | max. value)
0 Incr. 1073741824
Subcodes Lenze setting Info
C01672/1 0 incr. L_ComparePhi_1 : Window
C01672/2 0 incr. L_ComparePhi_2 : Window
C01672/3 0 incr. L_ComparePhi_3 : Window
C01672/4 0 incr. L_ComparePhi_4 : Window
C01672/5 0 incr. L_ComparePhi_5 : Window
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01751 | Service code inverter characteristic
Data type: UNSIGNED_8
Index: 22824
d
= 5928
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01752 | Service par. inverter charact. function
Data type: UNSIGNED_8
Index: 22823
d
= 5927
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01755 | Service par. inverter charact. factor
Data type: INTEGER_16
Index: 22820
d
= 5924
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01763 | Service code -clamp threshold
Data type: INTEGER_16
Index: 22812
d
= 591C
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01764 | Service par. clamp time
Data type: UNSIGNED_8
Index: 22811
d
= 591B
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01765 | Service code - difference threshold UG
Data type: UNSIGNED_16
Index: 22810
d
= 591A
h
This code is for device-internal use only and must not be written to by the user!