Lenze 8400 TopLine - Manual (Page 1708)

19 Function library
19.2 System blocks
1708
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Parameter
19.2.19 LS_MotionControlKernel
Interface to the basic drive functions implemented in Motion Control Kernel (MCK).
19.2.20 LS_MotorInterface
Interface to internal motor control.
19.2.21 LS_MultiEncoder
Interface to the Multi-Encoder.
Parameter Possible settings Info
C00727/1...8 0 1 Keypad digital values
• Execution of control commands
for keypad operation
• See the "Outputs" table for the
meaning of the individual
subcodes
C00728/1...3 -199.99 % 199.99 Analog values - keypad
• Selection of various setpoints for
operation via keypad
• See the "Outputs" table for the
meaning of the individual
subcodes

For a detailed description see the main chapter "Basic drive functions":
 Internal interfaces | System block "LS_MotionControlKernel" ( 554)

For a detailed description see the main chapterl "Motor control (MCTRL)":
 Internal interfaces | System block "LS_MotorInterface" ( 305)

For detailed information please see the main chapter "Encoder/Feedback system":
 Internal interfaces | System block "LS_MultiEncoder" ( 349)