Lenze 8400 TopLine - Manual (Page 726)

10 Diagnostics & error management
10.9 Error messages of the operating system
726
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Ck16: Time overflow manual operation [xx.0184.00064]
Ck05: Following error 1 [xx.0184.00153]
Ck06: Following error 2 [xx.0184.00154]
Ck07: Travel range limit exceeded [xx.0184.00155]
Ck08: Home position unknown [xx.0184.00156]
Ck09: Positioning mode invalid [xx.0184.08005]
Response (Lenze setting printed in bold)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
PC manual control: The connection monitoring has
tripped.
• The online connection between the PC and the
controller has been interrupted for a longer period of
time than the timeout set in C00464/1 .
• Check communication link between PC and
controller.
• Check voltage supply/function of the controller.
• Adjust the timeout ( C00464/1 ).
Response (Lenze setting printed in bold) Setting: C00595/5 ( Adjustable response)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
MCK: Following error limit 1 ( C01215/1 ) has been
exceeded.
• Optimise control mode.
• Increase following error limit.
• Deactivate following error monitoring.
Response (Lenze setting printed in bold) Setting: C00595/6 ( Adjustable response)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
MCK: Following error limit 2 ( C01215/2 ) has been
exceeded.
• Optimise control mode.
• Increase following error limit.
• Deactivate following error monitoring.
Response (Lenze setting printed in bold) Setting: C00595/7 ( Adjustable response)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
MCK: The maximum travel distance has been exceeded.
• The maximum travel distance is displayed in
C01213/1 .
• Check profile parameters.
• Deactivate travel range limit monitoring.
Response (Lenze setting printed in bold) Setting: C00595/8 ( Adjustable response)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
MCK: Home position is unknown. Perform homing.
Response (Lenze setting printed in bold) Setting: C00595/9 ( Adjustable response)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
MCK: The positioning mode defined via the
wPosProfileMode input is not supported.
Define a valid positioning mode.