Lenze 8400 TopLine - Manual (Page 1656)

19 Function library
19.1 Function blocks
1656
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
19.1.158.6 Action type "positioning"
For starting a positioning, 50 actions of "positioning" type are available. The Profile entry is made via
the parameters of the basic function " Positioning ".
Action call (entry in the sequence table)
with action number xxx = 001 ... 050
Parameter
The available actions 1 ... 50 are represented via the subcodes 1 ... 50.
Parameter Possible settings Info
C01405/1...50 Pos. action n: Starting with
0 Waiting function deactivated In the default setting, the execution
of the profile is started immediately.
1 Sequencer input 1
(Bit 0 of wDigitalInputs)
"Wait for level": The execution of the
profile is only started when the
selected sequencer input has the
polarity set in C01406/x .
2 Sequencer input 2
(Bit 1 of wDigitalInputs)
... ...
16 Sequencer input 16
(Bit 15 of wDigitalInputs)
C01406/1...50 Pos. action n: Polarity input
• State of the sequencer input
required for starting the profile.
0 Condition is bit state "0"
1 Condition is bit state "1"
C01407/1...50 Pos. action n: Profile number
• A sequence profile can be set in
the corresponding profile
parameter.
0 No profile executed
1...15 Execute profile no. 1 ... 15
C01408/1...50 Pos. action n: Jump destination
• Step within the sequence table
which is processed after the
profile has been executed.
0 Sequence step
1...100 Step 1 ... 100
C01409/1...50 0.000 s 2147480.000 Pos. action n: Monitoring time
• If the positioning process lasts
longer than the monitoring time
set here, it is branched to the
jump destination set in C01410/x .
When "0.000 s" is set (Lenze setting), time
monitoring is deactivated.
C01410/1...50 Pos. action n: Jump destination
monitoring
• Step that is executed after the
monitoring time has been
exceeded.
0 Sequence step
1...100 Step 1 ... 100
1 x x x