Lenze 8400 TopLine - Manual (Page 765)

Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
765
12 System bus "CAN on board"
12.8 Process data transfer
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.8.1 Available process data objects
The number of available process data objects for controllers of the 8400 series depends on the
device version:
Receive PDOs (RPDOs)
The process data objects transmitted from the system bus to the drive are processed via the
LP_CanIn1 ... LP_CanIn4 port blocks.
• Every port block provides 4 words (2 bytes/word). The data of every first word are provided in a
bit decoded manner (bit 0 ... 15).
• The first word of the LP_CanIn1 port block is defined as control word wCtrl. The wCtrl control
word does not have a permanent connection to the device control and can be used as required.
The predefined assignment of the wCtrl control word in the C00007 = "30: CAN" control mode
depends on the technology application selected in C00005 :
• TA "Actuating drive speed":
Process data assignment for fieldbus communication ( 450)
• TA "Table positioning":
Process data assignment for fieldbus communication ( 513)
• TA "Abschaltpositionierung":
Process data assignment for fieldbus communication ( 539)
Transmit PDOs (TPDOs)
The process data transmitted from the drive to the system bus are processed via the
LP_CanOut1 ... LP_CanOut4 port blocks.
• Every port block receives 4 words (2 bytes/word). The data of every first word are transmitted
bit by bit (bit 0 ... 15).
• The first word of the LP_CanOut1 port block is defined as the wState status word. The wState
status word does not have a permanent connection to the device control and can be used as
required.
• Vordefinierte Belegung siehe wDeviceStatusWord status word der Antriebsschnittstelle.
Process data object Version
"BaseLine C"
from version
"StateLine C"
RPDO1 | Port block "LP_CanIn1"  
RPDO2 | "LP_CanIn2" port block  
RPDO3 | "LP_CanIn3" port block 
RPDO4 | "LP_CanIn4" port block 
(from version 15.00.00)
TPDO1 | "LP_CanOut1" port block  
TPDO2 | "LP_CanOut2" port block  
TPDO3 | "LP_CanOut3" port block 
TPDO4 | "LP_CanOut4" port block 
(from version 15.00.00)