Lenze 8400 TopLine - Manual (Page 1662)

19 Function library
19.1 Function blocks
1662
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
19.1.158.12 Action type "Counter setting"
For setting one of the 5 available counters to a certain starting value, 5 actions of "Counter setting"
type are available.
• The 5 actions of "counter setting" type are not permanently assigned to the 5 counters.
• You can, e.g., set a counter to a value using an action of "counter setting" type and at a later
program time set the same counter to a different value using another action of "counter
setting" type.
• The current counter content of the counters 1 ... 5 is displayed in C01443/1...5 .
Action call (entry in the sequence table)
with action number xxx = 001 ... 005
Parameter
The available actions 1 ... 5 are represented via the subcodes 1 ... 5.
Parameter Possible settings Info
C01441/1...5 Counter setting act. n: Counter no.
0 Counter setting deactivated
1 Counter 1
... ...
5 Counter 5
C01442/1...5 -2147483647 2147483647 Counter setting act. n: Starting value
0
Set
0 0
8 x x x