Lenze 8400 TopLine - Manual (Page 674)

10 Diagnostics & error management
10.2 LED status displays
674
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10.2 LED status displays
Related topics:
 Device control (DCTRL) ( 99)
 Device state machine and device states ( 113)
 System bus "CAN on board" ( 749)
Information on some of the operating states can be quickly obtained via the
LED display on the front of the controller.
Labelling Colour Description
CAN-RUN green CAN bus ok  LED status displays for
the system bus ( 755)
CAN-ERR red CAN bus error
DRV-RDY green Standard device ready for operation  LED status displays of the
device status ( 675)
DRV-ERR red Warning/trouble/fault
AB-STATE green Axis bus status  LED status displays of the
axis bus ( 837)
- - These LEDs are currently not provided with a function!
- -
USER orange Starting from version 12.00.00 , this LED can be triggered with any
digital process signal via the LS_DigitalOutput system block. ( 400)
CAN-RUN
CAN-ERR
DRV-RDY
DRV-ERR
AB-STATE
USER