Lenze 8400 TopLine - Manual (Page 1699)

Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
1699
19 Function library
19.2 System blocks
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Related topics:
 Overview of function blocks available ( 1381)
 Working with the FB Editor ( 1329)
LS_ParFix
LS_ParFix_2
Output of frequently used constants (TRUE, FALSE, 100 %, etc.) to
be used in the interconnection
• LS_ParFix_2 is available from version 02.00.00.
 
LS_ParFree
LS_ParFree_2
Output of 32 parameterisable 16-bit signals
• LS_ParFree_2 is available from version 02.00.00.
 
LS_ParFree_a
LS_ParFree_a_2
Output of 16 parameterisable analog signals
• LS_ParFree_a_2 is available from version 02.00.00.
 
LS_ParFree_b Output of 32 parameterisable digital signals  
LS_ParFree_p Output of 8 parameterisable position signals  
LS_ParFree_v
LS_ParFree_v_2
Output of 8 parameterisable speed signals
• LS_ParFree_v_2 is available from version 02.00.00.
 
LS_ParFree32 Output of 8 parameterisable 32-bit signals
• This SB is available from version 02.00.00.
 
LS_ParFreeUnit
LS_ParFreeUnit_2
Output of 16 parameterisable position signals with internal
conversion of [unit] in [increments]
• These SBs are available from version 02.00.00.
 
LS_ParReadWrite_1
...
LS_ParReadWrite_6
Reading/Writing of local parameters  
LS_PulseGenerator Output of 9 fixed frequencies and 1 parameterisable frequency  
LS_Resolver Interface to the resolver
 Resolver (X7) ( 319)
 
LS_RetainData Selection and saving of retain data
• This SB is available from version 02.00.00.
 
LS_SetError_1 Parameterisable responses to user-defined events are tripped
 Diagnostics & error management ( 673)
 
LS_SetError_2  
LS_SyncManagement Output of status information for synchronising the internal time
base
 Synchronisation of the internal time base ( 857)
 
LS_TouchProbe Interface for touch probe detection
 Touch probe detection ( 411)
 
LS_WriteParamList Interface to the basic "Parameter change-over" function
 Parameter change-over ( 859)

System block Function can be inserted into
level:
I/O Appl.