Lenze 8400 TopLine - Manual (Page 1726)

19 Function library
19.2 System blocks
1726
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Parameter
19.2.36 LS_Resolver
Interface to the resolver.

Note!
The real length of the low or high level at the bSquareWave output is always 1 ms higher
than set in C00400/1 or C00400/2 . If "0 ms" is set, a level with a length of 1 ms is created
length, for instance, and if "1000 ms" is set, a level with a length of 1001 ms is created.
Parameter Possible settings Info
C00400/1 0 ms 60000 Length of the low level (break) + 1 ms
• For output bSquareWave
• Lenze setting: 1000 ms
C00400/2 0 ms 60000 Length of the high level + 1 ms
• For output bSquareWave
• Lenze setting: 1000 ms
C00400/3 0 ms 60000 Delay of the status bFirstCycleDone
• Lenze setting: 100 ms

For detailed information please see the main chapter "Encoder/Feedback system":
 Internal interfaces | "LS_Resolver" system block ( 324)