7 manual jog, Manual jog, Manual jog ( 625) – Lenze 8400 TopLine User Manual
Page 625: Perating mode, Mode is left, 9basic drive functions (mck)
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
625
9
Basic drive functions (MCK)
9.7
Manual jog
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.7
Manual jog
In this operating mode, the drive can be traversed manually in a clockwise or anticlockwise direction
("jogging mode").
• As an option, it is possible to change over to a second speed during traversing.
• "Retraction" of operated (travel range) limit switches is also supported. Only traversing in the
corresponding retracting direction is then possible.
Danger!
During manual jog, specially assigned profile parameters are effective. If these
parameters are not set correctly, the drive may execute unexpected movements!
Stop!
In the Lenze setting, travel range monitoring is switched-off in
by means of
hardware limit switches and software limit positions for the "Manual jog" operating
mode!
If travel range monitoring has been deactivated, the drive can travel into a mechanical
limit during manual jogging and machine parts can be destroyed or damaged!