Lenze 8400 TopLine - Manual (Page 350)

6 Encoder/feedback system
6.3 Multi-Encoder (X8)
350
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Display parameter
bFail
BOOL
TRUE Group error: There is an error (e.g. encoder wire breakage) according
to the bFail configuration in C00431/1 .
From version 14.00.00 , the error type is displayed bit-coded in
C00451/1 .  Monitoring
bState
BOOL
(from version 02.00.00)
Status bit 1 of the encoder
• The bit position of the status bit within the 32-bit data telegram can be set in
C00426/6 .
• If C00426/6 = "32", the evaluation of the status bit 1 is deactivated and FALSE is
always output at bState.
bState2
BOOL
(from version 14.00.00)
Status bit 2 of the encoder
• The bit position of the status bit within the 32-bit data telegram can be set in
C00426/8 .
• If C00426/8 = "32", the evaluation of the status bit 2 is deactivated and FALSE is
always output at bState2.
bState3
BOOL
(from version 14.00.00)
Status bit 3 of the encoder
• The bit position of the status bit within the 32-bit data telegram can be set in
C00426/9 .
• If C00426/9 = "32", the evaluation of the status bit 3 is deactivated and FALSE is
always output at bState3.
Parameter Info Lenze setting
Value Unit
C01119/1 LS_MultiEncoder: Current position - units
C01119/2 LS_MultiEncoder: Maximum travel distance - units
Highlighted in grey = display parameter
Identifier
Data type
Value/meaning