Lenze 8400 TopLine - Manual (Page 30)

2 Introduction: Parameterising the controller
2.1 Integrated technology applications
30
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2.1 Integrated technology applications
The following technology applications integrated in the drive controller 8400 TopLine provide the
main signal flow for the implementation of a general or a special drive solution:
Technology application "Actuating drive speed"
This preset technology application serves to solve speed-controlled drive tasks, e.g.
conveyor drives (interconnected), extruders, test benches, vibrators, travelling drives,
presses, machining systems, metering units.
technology application "Actuating drive speed (AC Drive Profile)"
This technology application available
from version 13.00.00 provides a speed and
torque control by means of "AC Drive Profile". The fieldbuses EtherNet/IP™ and
system bus (CANopen) are supported.
Technology application "Table positioning"
This technology application serves to solve position-controlled drive tasks which are
normally controlled by a higher-level control via a fieldbus, e.g. transport facilities,
rotary tables, storage and retrieval units, feed drives, metering units, hoists.
Note: This TA requires an external sequence control!
From version 12.00.00 , the FB L_Sequencer_1 can also be used as internal sequence
control. This FB processes a positioning program based on a sequence table.
"Switch-off positioning" technology application
This technology application is used to solve speed-controlled drive tasks which
require a pre-switch off or stopping at certain positions, e.g. roller conveyors and
conveying belts. The pre-switch off is implemented by connecting switch-off sensors.

Note!
Please note that the "StateLine", "HighLine" and "TopLine" device types differ with regard
to the number, functional range, and flexibility of the technology applications offered.

Detailed information on each technology application can be found in the main chapter
" Technology applications ". ( 428)