Lenze 8400 TopLine - Manual (Page 330)

6 Encoder/feedback system
6.3 Multi-Encoder (X8)
330
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.3.2.2 Parameterising the encoder
Parameterisation dialog (cutout)
Further parameterisation dialogs:  Scaling of position value
Parameter Info Lenze setting
Value Unit
General settings
C00422 LS_MultiEncoder: Encoder type 0: Incremental encoder (TTL)
C00421 LS_MultiEncoder: Supply voltage 5.0 V
C00420/3 LS_MultiEncoder: Encoder increment
• Setting is relevant for process data channel
(incremental SinCos track).
512 Incr./rev.
C00497/3 LS_MultiEncoder: Encoder filter time 1.0 ms
C01112/1 LS_MultiEncoder: Position offset 0.0000 units
Settings for SinCos absolute value encoder with HIPERFACE® protocol
C00492 Hiperface: Detected TypCode -
C00494/1 Hiperface: Number of revolutions
• Number of resolved revolutions of the Hiperface
track.
• Setting is relevant for parameter channel.
0
C00494/2 Hiperface: Steps per revolution
• Resolution of the Hiperface track.
• Setting is relevant for parameter channel.
0
C00499/1 Hiperface: Advanced settings 0x0
Highlighted in grey = display parameter