Lenze 8400 TopLine - Manual (Page 1002)

17 Parameter reference
17.2 Parameter list | C00506
1002
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00506
Parameter | Name:
C00506 | PW protection internal config
Data type: UNSIGNED_16
Index: 24069
d
= 5E05
h
From version 15.00.00
Configuration of the password protection for device-internal parameter access
 Individual password protection for single communication channels
Setting range (min. hex value | max. hex value)
0x0000 0xFFFF
Value is bit-coded: Info
Bit 0 Only access to user menu The menus in the keypad are reduced. Only the user
menu can be used to change parameters.
Bit 1 Parameter write protection Via system blocks ( LS_ParReadWrite1-6 and
LS_WriteParamList ), write/read parameters cannot be
written.
Bit 2 Parameter read protection Via system blocks ( LS_ParReadWrite1-6 and
LS_WriteParamList ), write/read parameters cannot be
read.
Bit 3 Reserved
Bit 4 Reserved
Bit 5 Reserved
Bit 6 Reserved
Bit 7 Reserved
Bit 8 Reserved
Bit 9 Reserved
Bit 10 Reserved
Bit 11 Reserved
Bit 12 Reserved
Bit 13 Reserved
Bit 14 Reserved
Bit 15 Reserved
Subcodes Lenze setting Info
C00506/1 0x0007 PW protection internal config
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT