Apple Motion 3 - Manual (Page 958)

958 Chapter 10 Using Filters
Parameters in the Inspector
Center: Sets the center point on the object from which the tiles are generated. Values
are coordinates.
Radius: Sets the radius of each tile. Values range from 4 to 32.
Feathering: Sets the amount of feathering applied to the edges of each tile. Values
range from 0 to 1.
Seed: Sets a number to be used as a seed for tile placement and stacking. Values range
from 0 to 1000.
Mix: Sets the amount of the filtered frame to be mixed with the original source frame.
Values range from 0 to 100%.
HUD Controls
The HUD contains the Radius, Feathering, and Seed controls.
Tile
This filter tiles an image. The number of duplicates of the image that appear depends
on the value of the Scale parameter.
This filter causes rasterization in 3D groups.
Parameters in the Inspector
Center: Sets the position of the origin of the tiles.
Skew: Sets the amount of skew applied to the tiles. Values range from –3 to 3.
Scale: Sets how much the tiles are scaled. Values range from 0.05 to 20.
Stretch: Sets the amount tiles are stretched vertically. Values range from 0.1 to 10.
Angle: Sets the angle of rotation of the tiles.
Original image Tile applied