Apple Motion 3 - Manual (Page 796)

796 Chapter 9 Using the Replicator
Tile Offset: Specifies the amount (in percentage points) that the elements are offset
from the pattern. Values from 0 to 100% offset the rows toward the right, and values
from 0 to –100% offset the rows toward the left. A value of 50 or –50% creates a
“brickwork” pattern. This parameter is available when the Arrangement parameter is set
to Tile Fill.
Origin: Specifies how the elements traverse across the pattern from a point of origin.
For example, when set to Left, the elements sweep across the pattern from left to right.
When set to Upper Right, the elements traverse from the upper-right corner point of
the shape to the lower-right corner. This parameter is available when the Arrangement
parameter is set to Tile Fill or Random Fill.
When Rectangle or Image is chosen from the Shape pop-up menu and Arrangement is
set to Tile Fill or Random Fill, the Origin options are:
 Upper Left: The elements originate in the upper-left corner of the pattern and end
in the lower-right corner.
 Upper Right: The elements originate in the upper-right corner of the pattern and
end in the lower-left corner.
Circle set to Tile Fill Tile Offset set to a value of 20%
Origin set to Left Origin set to Upper Right