Apple Motion 3 - Manual (Page 884)

884 Chapter 10 Using Filters
The saturation controls the intensity of the color in an image, with a high saturation
resulting in vivid color, and a low saturation resulting in a grayscale image with no
color at all. The Value slider, on the other hand, adjusts the overall brightness or
darkness of all colors in an image, including the blacks and whites in a desaturated
image.
Parameters in the Inspector
Hue: Sets the angle of adjustment used to set the zero point of the color wheel.
Saturation: Sets the color saturation of the object, ranging from –1.0 (no color
information) to 0.0 (unadjusted color) to 3.0.
Value: Sets the intensity adjustment applied to the object, ranging from 0.0 to 2.0.
Mix: Sets what percentage of the original image is blended with the filtered image.
Values range from 0 to 100%.
HUD Controls
The HUD contains the same controls as the Inspector, with the exception of the mix
control.
Original image HSV Adjust filter applied (low
saturation goes to grayscale)