Apple Motion 3 - Manual (Page 889)

Chapter 10 Using Filters 889
Parameters in the Inspector
Threshold: Sets the threshold of selection for color substitution. Values range from 0 to
1.00. The threshold determines what will be considered light and what will be
considered dark areas of the object.
Smoothness: Sets the smoothness of transition between the two colors substituted,
with values ranging from 0 to 1.00.
Dark Color: Picks the color used to represent the dark interpreted areas of the object.
The color picker can be expanded with the disclosure triangle to include Red, Green,
Blue, and Alpha sliders, for more precise color selection.
Light Color: Sets the color used to represent the light interpreted areas of the object.
Correct For Alpha: This setting renders semi-transparent pixels correctly. Enable this
setting if the edges of the filtered image show artifacts.
Mix: Sets what percentage of the original image is blended with the filtered image.
Values range from 0 to 100%.
HUD Controls
The HUD contains the same controls as the Inspector, with the exception of the mix
control.
Tint
Tints an entire image with a single color. Shadows and highlights are less affected, but
all of the midrange colors in the image are gradually replaced with the tint color as the
Intensity parameter is increased.
Parameters in the Inspector
Color: Picks the color that is used to tint the object. The color picker can be expanded
with the disclosure triangle to display Red, Green, Blue, and Alpha sliders for more
precise color selection.
Original image Tint (brown) applied